The ~Carhartt 3906 Steel Toe Work Boot is geared for work conditions in a production facility or in the middle of a field. This work boot is guaranteed waterproof and is built with the working person's comfort and protection in mind.
The full grain leather uppers have just the right amount of oil content to make them supple and comfortable from the moment you put them. The lacing hooks are heavy duty and will stand up to regular work use. A convenient pull tab is securely stitched to the uppers to aid in pulling on these steel toe boots.
The soles are attached with Goodyear welt construction and can be resoled. The polyurethane outsoles are slip and oil resistant and feature a minor tread pattern to provide traction in a number of environments, but will be easy to scrape clean for the times you are going between dirty work conditions and your truck or work trailer. The outsoles are lighter weight, flexible and will provide cushioning.
Electrical Hazard rated boots are tested by an independent lab and withstand applications of 14,400 volts (rms) at 60 Hz for one minute with leakage in excess of 3.0 milliamperes. These special boots and shoes can protect the wearer against open circuits up to 600 volts or less under dry conditions.
There are two basic requirements all safety footwear must meet: impact and compression. There are three classifications of each according to test results. I/75, I/50 and I/30 are designations for test results done with a 50-pound weight dropped from a set height. C/75, 1,750 pounds (C/50) and 1,000 pounds (C/30). The toe must have a minimum clearance inside the toe area of the shoe of 16/32" for men's footwear and 15/32" for women's footwear after the tests are completed.
These Carhartt Steel Work Boots certainly fit the bill regarding safety. And with our low prices here at WPS, that bill will be affordable! Get your pair now.
Sizes Manufactured: D 8-12,13,14 | EE 8-12,13